top of page



Weight ±5 %
Width ±2 %

High modulus fiber Torayca® M40J to HT carbon fiber (most commonly used standard fiber)
Tensile strength of about 12 % higher
Tensile modulus of about 58 % higher
(At a slightly lower elongation at break of 1.2 % from 1.5 %)

Unidirectional non crimp fabric, lying absolutely flat, almost 100 % utilisation of fibre properties, above all considerably higher compressive strength than fabric, higher fibre content possible, all cuts possible without fraying. For max rigidity values and excellent tensile and compressive strengths. Film on one side.

Calculated data for hand laminates with 45 volume percent fibres:
Resin consumption: 166 g/m², laminate thickness: 0,26 mm, laminate weight: 416 g/m²

Carbon non-crimp fabric 250 gm² (UD, UHM)

    bottom of page